Short answer: In fog, use your low-beam headlights. Add front fog lights only when visibility is seriously reduced, and never switch to high beams, because the beam reflects off the water droplets and glares back at you. Fog lights supplement low beams; they do not replace them.
Key takeaways
- Low beams are the base setting in fog; high beams make it harder to see.
- Front fog lights are an extra for seriously reduced visibility; Nissan’s manual says generally less than 100 m (328 ft).
- Fog lights are separate lamps mounted low on the front, switched on after the headlights.
- Rules differ by state, so check your state’s vehicle code and your owner’s manual.
- Distributors should sell fog lights as an add-on to low beams, never as a replacement.
What lights should you use in fog?
Use low-beam headlights first. They light the road and make your car visible to others without throwing glare back from the fog. If visibility is seriously reduced, add your front fog lights, if the car has them. If it does not, keep the low beams on and slow down.
- Low beams: on, always, in fog.
- Front fog lights: add them when seeing the road ahead is hard.
- High beams: off.
- Parking lights or daytime running lights alone: not enough. On some cars the rear lights stay off with daytime running lights, so other drivers cannot see you.

Why shouldn’t you use high beams in fog?
High beams make fog harder to see through because the light bounces off the water droplets and straight back to the driver. The federal headlamp standard, FMVSS No. 108, describes the upper beam as "intended primarily for distance illumination and for use when not meeting or closely following other vehicles" (S4). Distance lighting only helps when the air is clear. In fog the droplets scatter the beam, and low beams aim lower, so less light goes into the fog in front of your eyes. For the full difference, see high beam vs low beam.
When should you turn on fog lights?
Turn on front fog lights only when visibility is seriously reduced. Nissan’s owner’s manual says front fog lights should only be used when visibility is seriously reduced – generally, to less than 100 m (328 ft). Kia says its front fog lights are designed to improve visibility in fog, rain, or snow and warns that they use a lot of electrical power, so they should be used only when visibility is poor.
| Conditions | Low beams | Front fog lights | High beams |
|---|---|---|---|
| Clear night | On | Off | Only where allowed and with no traffic ahead |
| Light mist, road ahead still clear | On | Usually off | Off |
| Dense fog, visibility seriously reduced | On | On, if fitted | Off |
| Heavy rain or snow, visibility poor | On | On, if fitted | Off |
| Fog clears | On as needed | Off | Off while fog remains |
Are fog lights the same as low beams?
No, fog lights are separate lamps, mounted low on the front of the car and aimed low. Texas law is one example: Transportation Code § 547.328 requires a fog lamp to be "mounted on the front of the vehicle at a height from 12 to 30 inches". It also limits how high the strong part of the beam may reach: for a lamp left of the vehicle’s center, no higher than four inches below the lamp’s center at 25 feet. Other states have their own rules.
- Position: low beams sit in the headlight; fog lights sit lower on the bumper area.
- Aim: fog lights are aimed low, so the beam stays low and flat in front of the car.
- Job: low beams are the main headlights; fog lights add short-range light in poor visibility.
Do fog lights have to be used with headlights?
Yes, treat fog lights as an add-on to your headlights. Kia’s manual tells the driver to switch the fog lights on after turning the headlights on, and Nissan’s manual says the front fog lights will not operate in the AUTO position unless the low beam is on. In Texas, "lighted fog lamps may be used with lower headlamp beams" (§ 547.328). State rules differ, so check your own vehicle code and owner’s manual.
Where is the fog light switch and what does the symbol look like?
The front fog light switch is usually a button or ring on the headlight control or dashboard, marked with a lamp symbol and wavy lines, and the car shows a matching dashboard light when the fog lights are on. If you cannot find it, check the owner’s manual. Our guide to how to turn on fog lights shows the symbols. Some cars, mostly sold outside the U.S., also have a separate rear fog light; Nissan’s Juke manual lists one as "where fitted".

What should distributors tell customers and stock?
Tell customers one rule: low beams first, fog lights second, high beams never. Fog lights sell as an add-on, not a replacement, and the product page and the box should say so.
- Stock the common fog sockets: H8, H11, 9005 and 9006 cover many fog lamp sockets. Confirm each customer’s socket with the vehicle’s bulb guide before they order.
- Print the rule on the pack: a short insert saying "turn on low beams first" cuts misuse and support questions.
- Check destination rules: fog lamp color, aiming and use rules vary by country and state, so confirm the requirements for your market before you order.
- Compare fog lights with other lamps: customers often confuse them with driving lights. Our fog lights vs driving lights guide gives you a plain answer to share.
How TUHO supplies this category
TUHO Lighting is an automotive LED lighting manufacturer in Dongguan, Guangdong, China. Its LED fog lights range covers bulbs and projector-style lamps. Examples on the site include the H8 / H11 / 9005 / 9006 LED Fog Light Bulbs, 4014 Chip, 62SMD, 12V and the G11 3-Inch Bi-LED Fog Lights, 30000LM, 130W, H8 / H11 / H4, with specifications as listed on each product page. TUHO supports OEM/ODM, custom logo, color boxes and outer cartons, and small mixed-SKU orders. Products are matched to the destination market’s rules, and the required documents are confirmed per model and per order.
Sourcing fog lights for your range? TUHO supports OEM/ODM, custom logo and packaging, mixed-SKU orders and sample testing. Request a quote
FAQ
Can I use fog lights instead of headlights in fog?
No, you cannot use fog lights instead of headlights in fog. Fog lights supplement your low beams. Kia’s manual says to switch the fog lights on after the headlights, and Nissan’s front fog lights will not operate in the AUTO position unless the low beam is on.
Are fog lights the same as low beams?
No, fog lights are not the same as low beams. They are separate lamps mounted low on the front of the car and aimed low, and they do not replace the low beams.
Is it illegal to use fog lights in clear weather?
It depends on where you drive. Car makers say to use fog lights only when visibility is poor, and some places restrict their use. The Texas statute only says lighted fog lamps may be used with lower headlamp beams. Check your own state’s vehicle code.
Should I use high beams if the fog is very thick?
No, do not use high beams in thick fog. They reflect off the droplets and cut what you can see. Slow down, keep the low beams on, add front fog lights if you have them, and pull off the road safely if you cannot see.
What should I do if my car has no fog lights?
If your car has no fog lights, use low beams, slow down and leave extra distance. Front fog lights can be added to many vehicles as aftermarket parts; match the bulb socket and wiring to your vehicle.
Bottom line: In fog, run low beams, add front fog lights only when visibility is seriously reduced, and keep high beams off.
Editorial note: Sources checked in November 2026: Kia’s online owner’s manual (front fog light operation); the 2024 Nissan Juke owner’s manual (front fog light); Texas Transportation Code § 547.328 as published by FindLaw; and FMVSS No. 108 (49 CFR 571.108, S4) as published by Cornell LII. Manuals describe their own vehicles and state rules differ, so confirm in your owner’s manual and your state’s vehicle code. We did not verify the rules of other states.
